DuraPatcher - Truck Mounted

Modern Spray Injection Technology for potholes, alligator cracks, shoulders and washouts.

All the same features of the trailer mounted DuraPatcher but with truck-mounted convenience. No need to feed rock from a dump truck/tow vehicle.

This maneuverable truck-mounted unit carries seven cubic yards of aggregate and 250 gallons of emulsion for self-sufficient patching. DuraPatcher is powered by John Deere diesel engine incorporated on subframe that mounts easily to the truck chassis. Call for truck specifications.

Truck Mounted DuraPatcher
• self-contained with aggregate supply

1. Seven cubic yard hopper provides extended patching without reloading.

2. Large directional arrow light helps protect operator when patching on public roads.

3. Balanced hose carrier relieves operator of any weight while providing a full range of motion around the DuraPatcher.

4. Water-cooled, fuel-efficient, 80 bhp John Deere diesel engine provides direct drive to the blower and compressor to provide all of the power needs of the DuraPatcher.

SPECIFICATIONS

Production
• 135 lbs./min, 1⁄4-1/2-inch wet or dry aggregate

Blower
• 450 cfm with 7 psi @ 1500 rpm
• Direct driven from engine flywheel
• 10 psi relief valve

Engine
• 80 HP water cooled John Deere

Compressor
• 15 cfm direct driven
• Governed from 70-95 psi

Tanks
• Emulsion - 250 gallons, 200 psi working pressure R-15 insulation
- Two 1500 watt heat blankets with thermostats
• Clean-Out - 15 gallon, 200 psi working pressure
• Engine Fuel - 18 gallons

Swing Hose Carrier
• Tri-Fold No Fatigue Design

Operator Controls
• Emulsion and rock flow, engine rpm, horn

Truck Requirements
• 33,000 GVW recommended

Color
• Safety orange

Our Method | About Us | Products | Contact | Video